Just did my countertops and installed new sink double sink which is about 3" deeper than old and drains offset. Also purchased new garbage disposal. With my old sink my disposal was on left side and drains centered. I started to install new disposable on right side and ran into an issue. Seems with the new sink being 3" deeper the outlet from disposable will be too long for the top inlet of the Tee. And if I attach the drain to the side of Tee it too will be too low and hit the pipe coming from the outside drain. Any suggestions on how I can fix this issue? I was suggested by Home Depot a disposable kit to rework all the pipes from ABS to PVC. Will this work or should I stay with the ABS?