kitchen

My house is a split level, so the kitchen is on a slab. The pipe runs underneath and connects to the main in our utility room. There is only one line to the main, no other connections. About a week ago I noticed water coming out of the opening in the cinder blocks where the 3 inch cast iron pipe...

So I live on the 2nd floor of a 2 story apartment. I was hearing this weird gurgling noise happening from my kitchen sink around the same time everyday so I called my landlord and he had a plumber come over and snake out my drain. Thought that took care of the problem but the next day it started...

I have been having a major plumbing issue for days. As far as I know it’s exclusive to my place and not existing with anybody else in the mobile home park I live in. Both the sink in the kitchen and the sink in the bathroom are clogged up with water. I have used 10 “Mr. Plumber” liquid bottles...

Just did my countertops and installed new sink double sink which is about 3" deeper than old and drains offset. Also purchased new garbage disposal. With my old sink my disposal was on left side and drains centered. I started to install new disposable on right side and ran into an issue. Seems...

Looking for a cartridge for this Kohler pull-out faucet.

Do you feel like you need two hands to install a lotion dispenser on a kitchen sink sometimes? It is a long reach for one person. Maybe that's why some service plumbers roll with two on the trucks? I'm normally working solo, so I have to make do with my long arms. Fatehpur-Sikri Here is a...

The kitchen is plumbed right now with 1/2-inch copper but I need to reroute the lines to prevent freezing. The water flow is great right now; I know PEX has a smaller inside diameter, so will a 15-foot run of 1/2-inch PEX provide enough water flow? Also, I want to bring the PEX up from the...

The Moen Renzo faucet CA87316 This was a replacement for an older one, let's take a look. The mounting cap can be installed either of two ways. This one was installed this way making it hard to use anything but the supplied Moen wrench. It was solidly on there, and the wrench wasn't having...

My kitchen sink is gurgling. It started off as a slight gurgling sound but now its a longer gurgling sound. No water is coming up though. The noise happens after the following: -after running the water in the kitchen sink (heavy sounding) -the washing machine drains its water (heavy sounding)...

I have a Delta two handle faucet, #2276, with spray that was purchased and installed in 1997. I recently removed the spout to flush the faucet, and when I did, a plastic insert came out of the base of the spout. It looks like a portion of the plastic insert has broken off and is missing. I have...

Hey! I did a renovation 2 years ago so my kitchen is new. I also have a whole house water filtration system with softener installed in the basement at the water main and a reverse osmosis system installed feeding my ice maker and a "drinking water" double faucet at one of my kitchen sinks. A...

we're buying a house and need to add a second kitchen...here's a picture of what we want...is this going to be a crazy impossible project, or is it actually not so bad because there's plumbing and im assuming a drain to tap into near by. any advise? esta es la cocina#1 = this is the existing...

Sometimes there is so little space between the bowl of a kitchen sink and the wall that getting a wrench up there is very difficult. And even if you can fit the basin wrench or pliers up there, you sometimes need that second hand to grip the portion of the faucet above the counter. Even my arms...

Have anyone seen a faucet mounting that looks like this before? I am trying to remove a leaking faucet, having a hard time removing it. Faucet also lacking any model number or manufacturer.

The Costco pull-out 906242 faucet and pictures in case you need to remove one. This one was about a year old and leaking. Held onto the base by an Allen screw. Almost there. One more Allen wrench to remove the top mount. This removes from the top. The Top Mount Base

Hi. I have a Brizo 64900 kitchen faucet that is leaking. Delta sent me a repair kit that contains new seats & springs. All the videos I've found show removing a dome cap to access all the parts that need replaced. This faucet has one big valve body cap. Anyone know if the entire valve body cap...

My kitchen sink and dishwasher are getting little hot water with very little pressure. The faucet is a single handle faucet and the pressure reduces dramatically when pushing the handle to hot. The dishwasher is only about 2-3 months old has worked fine until now. A little water comes thru...

I installed my new kitchen sink however the drain pipe from the wall and p trap extend past my sink tailpiece. I am not an expert at plumbing- do I need to take out the PVC wye that my dishwasher drain is attached to shorten the drain pipe going into my wall?

The Moen Banbury 87017 kitchen pull-out faucet is a fairly easy install. But then they all are. It's removing the old faucets that make it hard sometimes. Anyway, here is what this thing looks like. Moen 87017 Banbury A nifty little snap on for the hose. They supply a label for those...

Hello. I have a chrome pipe coming out of the wall under my kitchen sink that I can't get out. We were able to pull it out about an inch with a strap wrench, but now it's cracked half way around and I'm afraid it's going to break off and we won't have a good way to grip it. Is there a...