Dlhurley
New Member
First time posting here. Finishing up a major remodel of my first floor and the last thing remaining is the kitchen sink! I had a 2 basin sink and went to a single basin. First photo is the old plumbing and second is after I removed P trap onward. The issue is the new P trap doesn't align vertically with the sink drain, it needs to extend further. My first though was put some sort of coupling or a fernco on the trap arm to extend it but thinking that probably isn't the best solution. How could I put a trap adapter on here, just cut back close to first elbow? I should mention it's off vertically by ~.75inch. Thanks!