I need to replace a tee and pressure switch piping because of bad rust, but i am not certain if the pictured valve is a regular schrader or snifter, any way to tell which part i need to buy?
The tank is an old bladderless and don't see any valves or anything else attached to the tank other than the in and out lines
https://www.dropbox.com/s/9qgni3y1iglc9a8/20200914_204448.jpg?dl=0
https://www.dropbox.com/s/ansjw5fimx8u9t9/20200914_204501.jpg?dl=0
The tank is an old bladderless and don't see any valves or anything else attached to the tank other than the in and out lines
https://www.dropbox.com/s/ansjw5fimx8u9t9/20200914_204501.jpg?dl=0
Last edited: