Hello, I am trying to decipher this schematic for my sauna control panel and am wondering if anyone can help me answer a few questions.
I have the CX 30-U1 unit that is referenced on the schematic and I have 2 #10/3 cables coming into the unit from a subpanel and I understand that the red and black from these go to the L1 and L2 on the incoming side with the Neutral and ground as well.
I also understand I need 2 #10/3 coming out of the panel to the sauna heater and I see the schematic accounts for the L1 and L2 (red and black) and the ground, but what happens with the neutral (white) in this configuration?
Also, the schematic shows the A1 and A2 hook ups which I understand are #14/2 wire however, my question again is where do the neutrals go?
I have the CX 30-U1 unit that is referenced on the schematic and I have 2 #10/3 cables coming into the unit from a subpanel and I understand that the red and black from these go to the L1 and L2 on the incoming side with the Neutral and ground as well.
I also understand I need 2 #10/3 coming out of the panel to the sauna heater and I see the schematic accounts for the L1 and L2 (red and black) and the ground, but what happens with the neutral (white) in this configuration?
Also, the schematic shows the A1 and A2 hook ups which I understand are #14/2 wire however, my question again is where do the neutrals go?