Navien NPE2040A2 control

Users who are viewing this thread

Brentb2529

New Member
Messages
1
Reaction score
0
Points
1
Location
Va
Hi. We are deploying a number of the NPE-240A2 units and we were hoping to have the control by 30022717B(remote physical switch) as well as Navilink. We see the ability to have (2) 30022717B installed in parallel but not the option to have one 30022717B and one Navilink on the same NPE-240A2. Does anyone know if this is possible? It seems possible via the “multi remote controller cable” but the setup seems to point to only a configuration of two physical switches instead of one physical and one WiFi.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks