chargedmr2
New Member
Hello everyone,
Several weeks back I became suspicious that hard water had entered our system and I went back to check the settings--several of my settings had changed back to default. For example the reserve capacity (which was at 200g) was set back to 0. I also noticed that the timings for the backwash, rapid rinse, etc. were back to default settings. Over the course of the last several months we have had a power outage or two (but only for a minute or two). Could this be the cause?
I thought I was going crazy, but we just had another power outage (again, only for minutes) and today I went to set the clock on the unit and decided to double check the settings. Everything was as I set it, except the reserve capacity was back to 0. This is really becoming a hassle. Any ideas as to what is going on???
Several weeks back I became suspicious that hard water had entered our system and I went back to check the settings--several of my settings had changed back to default. For example the reserve capacity (which was at 200g) was set back to 0. I also noticed that the timings for the backwash, rapid rinse, etc. were back to default settings. Over the course of the last several months we have had a power outage or two (but only for a minute or two). Could this be the cause?
I thought I was going crazy, but we just had another power outage (again, only for minutes) and today I went to set the clock on the unit and decided to double check the settings. Everything was as I set it, except the reserve capacity was back to 0. This is really becoming a hassle. Any ideas as to what is going on???