Connection problems 1/2 one end 10m other

Users who are viewing this thread

Stumpedfittingshelp

New Member
Messages
1
Reaction score
0
Points
1
Location
Oran Mo
I am putting in new faucet it has m10 fitting on one end 1/2 on the other the half inch side won’t go on a 1/2 x 1/2 valve and box says to use 1/2 ips and I have a 1/2 compression fitting and a 1/2 fip by 1/2 od and it won’t connect to either valve whats am I needing to make it fit
 

Marlinman

In the Trades
Messages
771
Reaction score
340
Points
63
Location
Jacksonville Florida
You need to use a standard stop valve with 3/8" compression outlet and add this size adapter. The one shown is Lasco 10-0013

1662717028844.png
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks