Randyacton
New Member
After 3 years of of sitting on all the equipment, I finally got off my butt and installed it all. Here is order after well pump.
Constant pressure valve
Stenner econ fp
Inline mixer
ispring 100m spindown
ispring 50m spindown
BB 30m pleated
BB 5m string wound
Fleck 2510sxt 12×52 Katalox light
Fleck 2510sxt 12x52 fine mesh
Have been up and running for a few days and have a question or two.
1. I have read here that katalox likes to be backwashed daily....how much time should I give for BW/RR? Default on the 2510sxt is 10/10, that equates to about 160 gallons of water, which seems excessive on a daily basis.
2. Can I get a signal from the 2510sxt to send to the Stenner pump? Some of my faucets don't have enough flow to activate the inline Sika flow switch.
3. After setting up the softener, I am showing about 1200 gallons before recharge. That is about 10-12 days for our usage. Is that too long to wait? Should I increase reserve to drop days?
Thank you in advance for any help.
Constant pressure valve
Stenner econ fp
Inline mixer
ispring 100m spindown
ispring 50m spindown
BB 30m pleated
BB 5m string wound
Fleck 2510sxt 12×52 Katalox light
Fleck 2510sxt 12x52 fine mesh
Have been up and running for a few days and have a question or two.
1. I have read here that katalox likes to be backwashed daily....how much time should I give for BW/RR? Default on the 2510sxt is 10/10, that equates to about 160 gallons of water, which seems excessive on a daily basis.
2. Can I get a signal from the 2510sxt to send to the Stenner pump? Some of my faucets don't have enough flow to activate the inline Sika flow switch.
3. After setting up the softener, I am showing about 1200 gallons before recharge. That is about 10-12 days for our usage. Is that too long to wait? Should I increase reserve to drop days?
Thank you in advance for any help.