Nelliebelly
New Member
I've installed a new control box and a new pressure switch on my galvanized tank. I'm not getting any water, what do I do besides pulling my freaking hair out!?
No water
- Thread starter Nelliebelly
- Start date
-
- Tags
- no water
Users who are viewing this thread
You at least need a voltage meter to see if you are getting proper power to the pump. Then if you are and the pump still isn't running, a clip around amp meter would let you know if the motor is running and how well. With a new switch and box, you should at least hear some clicking and buzzing if you are getting power to everything.
Similar threads
