Tub to shower conversion, vent question

Users who are viewing this thread

rracraa

New Member
Messages
2
Reaction score
0
Points
1
Location
Arizona
Hello!
We're doing a bath tub to shower remodel. The drain needs to be moved over a few inches and changed to 2". I'm looking for some input on this situation as we've had a few plumbers come out for estimates and a couple mentioned the vent will be an issue and insist on installing a studor vent from the shower and up into a wall. Is this necessary?

The house is built in 2006 on post tension with a box cut out for the plumbing with gravel and dirt fill. We dug down and uncovered a 2" p trap and as a part of other demo found the vent coming up next to the double sink on an exterior wall. Im not sure the correct way to measure but from the p trap to the sill plate is 79"

Additional pictures I couldn't attach
 

Attachments

  • IMG_5973 2.jpg
    IMG_5973 2.jpg
    91 KB · Views: 24
  • Screen Shot 2024-02-16 at 10.10.39 AM 3.jpg
    Screen Shot 2024-02-16 at 10.10.39 AM 3.jpg
    74.9 KB · Views: 19
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks