Second floor bathroom plumbing help

Users who are viewing this thread

codebreaker9000

New Member
Messages
2
Reaction score
0
Points
1
Location
Ohio
View attachment 101534Hey everyone, I've been referencing old posts on this site a lot to help me do things correctly and it's been really helpful. Unfortunately I'm stuck.

In short, I started a bathroom renovation in our house, the toilet tough in is only 8" from the tub wall and everything felt smooshed together. I demolished everything down to studs and removed the tile and subfloor.

What I found were many cut joists and lots of water damage. I decided to update the old cast iron stack to pvc and so I cut it out.

Here's where words will make confusion so I'll try to let the pics do most of the talking.

Basically I can't figure out how to bring the plumbing back while staying in code while also having enough vertical space between the joists to fit my pipes and connections.

The vanity is on the left, the toilet in the middle, and the tub in an enclave to the far right. Oh yeah - there's also a joist smack dab on the 12.5" location for the rough in.

What's the proper way to hook all this up?

I'll include pics of the original layout for reference, as well as the view from under the bathroom View attachment 101533View attachment 101535
 

Attachments

  • Screenshot_20241007_182401.jpg
    Screenshot_20241007_182401.jpg
    126.9 KB · Views: 55
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks