Recommended Piping of Burnham Series 2E with Indirect Water Heater omitted and using Caleffi Trim Kit w/ AutoFill & Backflow & 1" Threaded Air Sep

Users who are viewing this thread

jconners

New Member
Messages
1
Reaction score
0
Points
1
Location
Nevada
Can you provide a sketch (and if possible a photo of a similar layout) of the piping if I omit the Indirect Water Heater as shown in the attached image taken from page 11 of the Burnham Series 2 installation manual? I will be using the Caleffi NA553362 Boiler Trim Kit w/ AutoFill & Backflow & 1" Threaded Air Separator & 4.4 Gal. Expansion Tank.
Burnham Series 2E Piping.JPG
 
Top