PumpNewb1
New Member
Hi All -
Doing a small bathroom remodel and using a transfer valve to control a separate wand. Everything is hooked up and working except for the transfer valve. I am positive that water is reaching the transfer valve but no matter which way i turn the handle only a trickle of water will come out which takes a long time to get too. There is like 0 pressure.
Side Note, I followed the instructions and converted it to a 2-way transfer valve. I took out the inner nut and followed instructions with the clip on the front.
Any ideas? Want to figure out before closing wall of course.
Doing a small bathroom remodel and using a transfer valve to control a separate wand. Everything is hooked up and working except for the transfer valve. I am positive that water is reaching the transfer valve but no matter which way i turn the handle only a trickle of water will come out which takes a long time to get too. There is like 0 pressure.
Side Note, I followed the instructions and converted it to a 2-way transfer valve. I took out the inner nut and followed instructions with the clip on the front.
Any ideas? Want to figure out before closing wall of course.