fitting

Hello everyone, I need some advice on finding the type of fitting I need to connect my 1-1/4 P-trap tailpiece from my bathroom sink into a galvanized waste pipe in the wall. My home was built in 1960, but this was the first time I messed with this plumbing part. I had a crack in a pedestal...

I used a DWV fitting for a back to back bath installation in 1982 in Michigan that was 4" top and bottom, 3" long sanitary Y on the sides, and 4 inlets above the 3" Y fittings which were 2". This allowed for installation of the two toilets using the 3" Y fittings, the tub/showers and vanity...

I'm adding a 4th bathroom to my home and need to update the waste pipe going to the septic tank from 3" to 4". The pipe coming out of the foundation immediately transitions from 4" to 3" leaving < 1" of pipe between the foundation and the clean out fitting. What would be the best way to cut off...

I have a Coleman 16' x 48" pool that I am adding a pool heater to. I am having issues finding the right fitting to create a nice watertight seal. The threads on the pool pump outlet are 2" NPT male with a gasket. The threads on the matching flex tube are a 2" NPT female, with a flat surface for...