Body spray pressure balancing loop

Users who are viewing this thread

Wakedog

New Member
Messages
5
Reaction score
0
Points
1
Location
DC
Looking for advice on pressure balancing loop for 3 body sprays. Does/will this pressure balancing loop work correctly? If not what needs to be changed? Thanks.

IMG_0705.jpg
 

John Gayewski

In the Trades
Messages
4,360
Reaction score
1,345
Points
113
Location
Iowa
Looks like this is going to drip water in between uses, probably from the bottom one constantly. I think those shower head outlets should be coming from the bottom of those rungs. Also the supply should come into each side in the middle. The path from each inlet to each outlet should be equal.
 

Wakedog

New Member
Messages
5
Reaction score
0
Points
1
Location
DC
Thanks for the advice! It shouldn't be too difficult to turn upside down and replumb.
 

Reach4

Well-Known Member
Messages
38,892
Reaction score
4,436
Points
113
Location
IL
I think the suggestion was to add the red pipe-- not to turn your proposal upside down.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks