taurusbia
New Member
I don't even know if this falls under plumbing, but I figured I should start somewhere. A few years ago, I had some clearing done in my field. The contractor sheared a water line I had going to two out door faucets. To make up for it, he trenched a new line and installed 1" PVC pipe, and T'd it off the line that goes up a hill to my house, from my well house. (This is where the line came off before). Well ever since then, when I go to turn on the water in my field, I get nothing. To make the water come out, I have to turn a hose or some kind of water on up at the house, until the pump kicks on, and then I can turn the water on down in my field. After doing this for a few years, I'm getting really sick of running water up at my house just to use the hose in the field. Someone suggested a check valve. Any other suggestions? Besides running the new pvc pipe, nothing else was changed to the system.
I appreciate any and all suggestions.
Thanks
I appreciate any and all suggestions.
Thanks