I have got the strainer disconnected from the pipe and have scored around the bottom of the strainer getting all the old putty off but it won't budge. I even hit it with a hammer all around it and it hasn't moved. Any other suggestions.
How do I remove a sink strainer
- Thread starter kate51
- Start date
Users who are viewing this thread
Jimbo
Plumber
Whether this is a kitchen or lav sink, there is a NUT under the sink which needs to be removed.
Sponsor
Paid Advertisement
hj
Master Plumber
- Messages
- 33,603
- Reaction score
- 1,042
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
IF there is putty UNDER the sink, then it has gotten into the threads and you will NOT be able to unscrew it. YOu will have to saw it out.
Nelrossen10
New Member
Start by removing the pipes that are connected to the old sink strainer.
Once the fittings are out of the way remove the old strainer nut with a large pair of pliers. This can be a little tricky sometimes. If you cannot get a good grip on it you may need to cut the nut out before you can remove the strainer. After the nut has been removed you can pull the old strainer out from the top of the sink.
Once the fittings are out of the way remove the old strainer nut with a large pair of pliers. This can be a little tricky sometimes. If you cannot get a good grip on it you may need to cut the nut out before you can remove the strainer. After the nut has been removed you can pull the old strainer out from the top of the sink.
Similar threads
