My Toto toilet was constantly filling slowly throughout the day. Replaced the flapper but it continued to run so I decided to try and flush out the fill valve and clean out the strainer. It's an E-Max Cyclone Type A fill valve.
I took it apart, rinsed each piece, and reassembled it but now no water fills the tank. When I remove the white piece in the photo, water shoots out of the top just fine. However, once I put the white piece back on, no flow comes out. There's only one way to put the white piece back on so I don't know why it would be blocking the flow. Fill tube has been checked and has no blockages.
Would anyone have any ideas how to fix this? Thanks in advance.
I took it apart, rinsed each piece, and reassembled it but now no water fills the tank. When I remove the white piece in the photo, water shoots out of the top just fine. However, once I put the white piece back on, no flow comes out. There's only one way to put the white piece back on so I don't know why it would be blocking the flow. Fill tube has been checked and has no blockages.
Would anyone have any ideas how to fix this? Thanks in advance.
Last edited by a moderator: