zoomzoom3
New Member
- Messages
- 5
- Reaction score
- 0
- Points
- 0
I removed the existing shower pan by using a circular saw and cutting around the drain. The original pan was 34" X 48" and the new pan is 32" X 48"(on sale). I would like to install the new pan but need some assistance.
1) How do I remove the existing drain?(see picture below)
2) How do I move the drain to accomodate the smaller pan? Is it advisable to use one of the oatey offset drains?
3) Do I need to change out the copper drain to a PVC drain and how do I do that? Where do I cut? How do I go from copper to PVC? Parts needed (I read about no hub connections)
Any help would be appreciated.
-dan
1) How do I remove the existing drain?(see picture below)
2) How do I move the drain to accomodate the smaller pan? Is it advisable to use one of the oatey offset drains?
3) Do I need to change out the copper drain to a PVC drain and how do I do that? Where do I cut? How do I go from copper to PVC? Parts needed (I read about no hub connections)
Any help would be appreciated.
-dan