MisterJJ
New Member
I need to remove two PEX lines and reconnect them to the the copper fittings. I've never worked with PEX before and I'm not sure how to identify what I need.
I think there are different types of fittings and I need different type of connectors (crimps?) depending on what I have.
FYI: I recently bought this house and found water softener resin in pipes, which come back after regeneration cycle. Traced it to the inlet/outlet lines for the softener being swapped. They tapped into the existing copper and ran a pair of PEX over to the softener but then connected them wrong.
I think there are different types of fittings and I need different type of connectors (crimps?) depending on what I have.
FYI: I recently bought this house and found water softener resin in pipes, which come back after regeneration cycle. Traced it to the inlet/outlet lines for the softener being swapped. They tapped into the existing copper and ran a pair of PEX over to the softener but then connected them wrong.
Last edited: