Hi - I'm just average Joe Homeowner with a pinhole leak in my kitchen sink sprayer hose. Access to end fitting at the faucet assembly seems impossible with other tubes, etc. in close proximity (and, of course, high and rearward and behind sink back wall) Here are my choices in my order of preference:
1: Remove and replace hose - Best, but how? Even a standard basin wrench seems unworkable.
2: Repair hose in place. The location of the pin hole is near the faucet so it doesn't need to flex or pass through the sink hole. Is there a product that will do this for me?
3: Remove sink (and hard-wired disposer) for easy access.
4: Call a plumber.
Are there other choices?
Can you give me insight for 1 and 2?
Thanks.
1: Remove and replace hose - Best, but how? Even a standard basin wrench seems unworkable.
2: Repair hose in place. The location of the pin hole is near the faucet so it doesn't need to flex or pass through the sink hole. Is there a product that will do this for me?
3: Remove sink (and hard-wired disposer) for easy access.
4: Call a plumber.
Are there other choices?
Can you give me insight for 1 and 2?
Thanks.