Hello,
I have two stems that are not equal in length. They work, but the stems are bent which makes the knobs rotate in an egg shaped pattern. I have considered replacing all of this, however I would prefer to just replace the thread in assemblies and knobs. Any help would be greatly appreciated.
Thanks,
Joseph Lewis
Funtogun@Cox.Net
I have two stems that are not equal in length. They work, but the stems are bent which makes the knobs rotate in an egg shaped pattern. I have considered replacing all of this, however I would prefer to just replace the thread in assemblies and knobs. Any help would be greatly appreciated.
Thanks,
Joseph Lewis
Funtogun@Cox.Net