How do I confirm that the Jet in the well is the proper Jet for the Pump?
Have Wayne CWS50 1/2 hp pump on a 2 inch packer jet setup, the jet/foot valve
is at 30 feet. I replaced the pump with the exact same pump when the well started
acting up initially, before pulling the drop pipe. i have since replaced everything, except for the Jet/Packer
assembly. Finally got the leathers sealed, and while the well is holding prime, and is pumping water
it is still extremely slow, my best guess is the jet is not the right one for this pump, betting it was never
matched for this pump, How do i find out what jet should be there, and where do i find one? there seems
to be plenty of water available, if i can get it to pump it out. have searched for wayne Jets, venturi's etc.. can not find anything. Please help
Have Wayne CWS50 1/2 hp pump on a 2 inch packer jet setup, the jet/foot valve
is at 30 feet. I replaced the pump with the exact same pump when the well started
acting up initially, before pulling the drop pipe. i have since replaced everything, except for the Jet/Packer
assembly. Finally got the leathers sealed, and while the well is holding prime, and is pumping water
it is still extremely slow, my best guess is the jet is not the right one for this pump, betting it was never
matched for this pump, How do i find out what jet should be there, and where do i find one? there seems
to be plenty of water available, if i can get it to pump it out. have searched for wayne Jets, venturi's etc.. can not find anything. Please help