sdaniel 81 1012
New Member
I am need of some help. I have a 2" galvinized casing for my well. I am not sure of the depth of the well it was on the property when we purchased it. So the well pump went bad and I replaced it with a Zoeller 1 hp convertible jet pump. The system is a one pipe deep well jet pump system. After I replace the the pump about two weeks later I notice water coming out of the ground beside the casing. It may be the casi g is bad. However, I feel that I have plumbed wrong some how. The pump will kick on at around 18 psi and kick off at 30 psi. The pump draws water fine. The pump cycles every minute. I feel like there is to much pressure being put back to casing to push the water up. Are the casing supposed to be pressurized in these sytems. Could some explain how these system work. Thanks in advanced.