Molo
Member
Hello All,
The CI flange is 1/2" below the sub-floor. What is the best wax ring(s) to use?
TIA,
Molo
The CI flange is 1/2" below the sub-floor. What is the best wax ring(s) to use?
TIA,
Molo
hj said:The Cast should have been cut and replaced with PVC, sticking up so the sub floor and finished floor were such that when the flange was installed it sat on the finished floor
A rather Draconian suggestion. Just break the flange off and lead/oakum a new one on after the floor is finished. A very, very simple job for a plumber.
hj said:A rather Draconian suggestion.
I think HJ was being facetious.Cass said:Why would replacing old cast during a project where new joice's and new sub and finish floor was being installed be "draconian"?
I would think it prudent.
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.