jmoser
New Member
Sorry, can't seem to find this thread. Need to add air to my waterlogged galvanized tank. Prefer to use compressor rather than empty the tank.
IRC, the procedure is:
turn off power to the pump
open a spigot
at the schrader valve, add air to about ? 28# of pressure? (I have an 80gal tank)
turn on power to the pump
turn off spigot
yes, no, corrections?
any reason I should NOT use the compressor method?
thanks
IRC, the procedure is:
turn off power to the pump
open a spigot
at the schrader valve, add air to about ? 28# of pressure? (I have an 80gal tank)
turn on power to the pump
turn off spigot
yes, no, corrections?
any reason I should NOT use the compressor method?
thanks