valve

Will someone please kindly help me identify this shower/tub valve?

Hello everybody, Hope you all are going well. I have a metal plug valve and I wants to use it in my bathroom. Is it possible to use it?

I'm considering purchasing a production home that will be built with PEX-A. The builder appears to be using Accor shutoff valves, which I'd plan to replace fairly soon after moving in. But I could foresee an issue with the stub-outs being fairly short meaning simply cutting off the old valve...

I was wondering, could you identify this Delta shower valve? I am at my grandparents house. There are two of these valves paired with the Delta pull-down diverter spouts and Delta arms, one with a 5.5 inch Moen Engage with Magnetix showerhead and the other with a Moen Adler showerhead.

Hi folks, my first post... Thanks for having me! I recently purchased a new house and both my shower and tub on the top floor are making a strange buzzing sound that comes and goes when water is running. It's only on cold to middle, not on hot. It's an american standard faucet, and I've...

Well, I found myself if an unwanted position. I was doing some work to my shower and removed the handle and trim kit. I threw it away thinking I would get something newer and just update the look. Wrong. I can't find anything to use with this valve. Does anyone know where I can find a compatible...

Hi there! My wife and I recently bought our first detached home! We bought a Moen Trim Kit for our upstairs bathroom, however, when the plumber we hired to install it (among many other things) came to do the work, he said he could not install it because he has never seen this valve before...

We are in the process of building a house and are starting to plan for installing a water softener. I have an outdoor water spigot that is connected to the house's PEX manifold system. The water flow will come in from the pressure tank (well source), then to a whole house sediment filter, and...

Hi, my question is when I start my shower I have to put it to almost 50% on the hot side. Then after 5 minutes the water gets colder (Luke warm). Then i turn the knob a little hotter, right after 5 min it gets colder again. What could be the cause of this?

I need to get the knob off this shower valve so I can tighten it up. The valve itself is tight and works well, it is only the knob that is loose, but I can't see a way to remove it. There is no brand identification anywhere on it. Nor are there any screws or other fasteners visible. If I...

The printed instructions from Delta says 8-18" between a faucet valve and the tub spout when using a shower head and spout diverter. Can I shrink this distance to my liking since I've capped off the shower port on my faucet valve? (i.e. tub only, no shower). I've mocked things up so that my...

I do not know the make/manufacturer of this Thermostatic Shower Valve that is malfunctioning. It is difficult to turn, makes a scraping sound when turned, doesn't appear to regulate temperature, hot is lukewarm even when the control is at the hottest setting. I am fairly certain I need to...

I'm trying to shut off the water to my kitchen faucet so that I can swap out a new cartridge. However, I'm not able to completely shut off the water under the sink. I realize that I can shut off the water to the house to perform this task, however, I would prefer to be able to shut it off...

What would cause low pressure in 4 zones - 1, 2, 4 and 6 (entire front yard and zone 6 in the back of the house)? Water barely trickles out of each sprinkler head in these zones, but pressure is fine in zones 3 and 5. There are 3 anti-siphon values (see attached drawing indicated by v v in...

Hi, I have a house built in 2013, and although I normally didn't use the washing machine valves to turn off the water in the past, I did recently when replacing the hoses. I noticed at that time that entire hot water valve body rotates about 15-20 degrees when turning the valve on and off, and...

Hi guys, I was wanting to replace my temperature control lever in the bathtub/shower because it was leaking. The problem is, no Allen key fits in the metal lever. When turning the Allen key that seems to fit, there seems to be some ticking noise but it just doesn't move the screw. Refer to the...

Tonight after I manually turned on one of my sprinkler zones for few minutes and after it was done I noticed that water was continuously leaking from the underneath the cap of the anti siphon valve. I thought it would stop after a few minutes, but it did not. When I tried to turn on the...

Anyone have any experience with AFWFilters? I'm looking at the AFWFilters 56SXT-10% Combo Package specifically. https://store.afwfilters.com/packag...ith-upflow-filter-10-resin-with-carbon-black/ Any opinions? Who do you prefer that sells Fleck valve controls?

Hi everyone, I need help identifying what aged shower control this is so I can replace it. It's approximately 20 years old and the only identifying mark I can see says "SP" at the bottom of the trim plate. And how would I remove this valve? There's like a nut screw around the valve stem, but...

Hello! Need help with a bathroom sink. It was clogged really bad and I was able to unclog it. Even when unclogged the water still fills up the sink faster than it can drain. The water pressure is very good. The sink seems to be draining well, but it's just too much water for the size of the...