Hello, what's the best way to deal with this problem. The 3 inch PVC pipe is in the way of my tub apron support. The tub is 60x30. Do I try cut the support from the tub or relocate the PVC pipe. Is that PVC a cleanout?
It appears that PVC pipe is a vent stack. I wonder if I could taper it off into a 2 inch pipe and that might give me the room I need. It's a 2 bath house.
There's a general rule in plumbing...you cannot go from a larger pipe to a smaller one (restriction) in the direction of travel of the material (air or waste). So, I do not think that going smaller would be allowed. SOmetimes the plumbers don't check this spot as often as they do on the plumbing specific ones.