Delta Faucets don’t match

Users who are viewing this thread

Parttim3r

New Member
Messages
1
Reaction score
0
Points
1
Location
Georgia, USA
Nearing the end of a very long bathroom renovation. Decided on the Delta Trinsic single hole pullout vanity sprayer.

We ordered two from build.com

They both have same part number, but only one is correct and matches the online images and the spec sheet. The other has some weird curve and sprayer angle.

They sent a replacement, and it is the same weird faucet.

Tried ordering one from Amazon and same weird curve / faucet arrived.

I’ve called multiple local supply companies to see if they have any in stock within a couple hundred miles I could drive, examine and then purchase. But nobody keeps in stock.

Delta was zero help, and the companies I ordered from have no idea.

Any thoughts? Shouldn’t a design change have different model number?

Photo shows the correct one on the left and abnormal one on the right.
 

Attachments

  • IMG_5356.jpeg
    IMG_5356.jpeg
    84.3 KB · Views: 69
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks