hose bibb

Hi first post here. The hose bibb for our outdoor garden hose has started dribbling a little even when tightened shut, so I bought a new bibb from Peavey Mart to replace the old one. But this morning when I tried removing the old bibb, I couldn't unscrew it even though I used two wrenches, one...

Good day ladies and gents, Recently I had to swap out a hose Bibb due to leaking, and I ended up getting a cool 1/4 turn one from Lowe’s. The problem that I’m having though is now when I run my sprinklers, I notice the other side of my house is running full pressure and the side with the new...

I have a hose bibb/faucet valve that is stuck open. I also have a 2 outlet adapter attached to it with it's own valve, so I can turn water on and off. Can anyone give me an idea as to why I can't turn the valve to off, and how to fix it? It's getting cold here in Oregon this week, and I...

I understand that vacuum breaker is required for outdoor hose bibb, but I had an old bibb with the vacuum breaker attached to the end, and I was having issues with it splashing water when closing the bibb with hose attached. Recently I had it replaced with Arrow-breaker bibb that had a vacuum...

Hello all, I'm looking to add a garden valve/spigot/hose bib whatever you want to call it to a irrigation main line that is 1 inch Sch 40 PVC. I'm going to T it, put a reducer to 3/4 inch since this is the brass garden valve sizes I'm finding. Im familiar with the PVC to copper transition...

When I think about all of the shutoff valves in our homes that may never get turned off like those for our main water turnoff, inside valves to turn off our hose bibs for the winter or those under our sinks that feed our sink faucets - - they are ALWAYS under "continuous use". In my new home...

Hello, My newer house has all PEX plumbing and there are two hose bibs; one in the garage and one on the back of the house. Both runs are post regulator...one of the runs is a 1/2" line off the end of a 3/4" main run of PEX. The other tees off the same main pretty close to the regulator but is...