frost-free

  1. J

    Does anyone sell 3/4" dia. pipe frost-free sillcocks?

    Does anyone sell 3/4" dia. pipe frost-free sillcocks? The current pipe going through the wall is 3/4" galvanized with a ball valve on the outside. My concern is flow. It's also difficult to imagine how a frost-free (especially a 1/4 turn ball-type) can flow anything like a non-frost-free. TIA
  2. B.A.

    Leaving outside faucet/sillcock on all the time

    Hello, I currently have an Arrowhead 420 series frost free sillcock faucet on my house. I'm located in MN. I have the faucets hooked up to timers to water my gardens with low pressure irrigation. As a result, I have to leave the faucet handles turned on all summer. Last year I had to replace...
  3. huntlylee

    Need advice on removing and replacing the frost-free spigot

    Hi, all: Long story short, I got a split frost-free spigot pipe and I am interested in a DIY job to replace it. At first, I attempted to thread it off with medium-level force but didn't succeed. I searched online and figured out the type of spigot should be the Arrowhead 486 with 1/2" MIP and...
Top