ArayT
Member
My resin is leaving my softener. What causes this and how can it be fixed? I trippled checked the piping. I was running water from a hose bibb that is located in front of my softener and the water turned orange, it was full of resin. I do not understand how this can happen because the bibb is located prior to the softener. The resin also settled in the filter which is located after the hose bibb but before the softener. (Pump- hose bibb- filter -softener-tank and then to the house). The softener (fleck 7000) has been operation for about 8 months. I don't think it has ever worked properly because we were still getting hard water but I found out that the potassium had gotten hard and was not desolving in my brine tank. This was corrected and I regenerated the system several times before putting back in operation. I bleached and flushed my well out last week and thought all was good. Any advice would be appreciated.
Thanks, Ray
Thanks, Ray