I have a Fleck 5600SXT with a 10x44 tank. It was prefilled with Indion 225 Naf resin. After installing the unit in our new house we found that our water had a funny taste and it caused us to have upset stomach issues. I called the retailer and they sent replacement resin, saying something about a bad batch. The replacement resin is the same type as was originally installed, so I'm skeptical that it will solve our problem.
I'm not an expert, but I do have some experience with water softeners having installed several of them and lived with them for most of my life. My dad and grandfather are builders and I've remodeled and built about 10 houses myself and softeners have been a part of almost every one.
So, my question is should I try to use this replacement Indion resin or toss it out and buy some other brand? I've read that Purolite C100E is good, but there are very few reviews or recommendations for any brand. Any adivce would be greatly appreciated.
Brian
I'm not an expert, but I do have some experience with water softeners having installed several of them and lived with them for most of my life. My dad and grandfather are builders and I've remodeled and built about 10 houses myself and softeners have been a part of almost every one.
So, my question is should I try to use this replacement Indion resin or toss it out and buy some other brand? I've read that Purolite C100E is good, but there are very few reviews or recommendations for any brand. Any adivce would be greatly appreciated.
Brian