Xenomorph
New Member
- Messages
- 41
- Reaction score
- 0
- Points
- 0
I am going to try to rough in a bathroom basement, but I am not too sure how to proceed on some of the drainage because I am new to working with a slab. Here's my questions:
1) For the toilet rough-in, am I supposed to use some sort of collar or tape around the stub where the concrete will touch the pipe to keep the pipe free I guess?
2) For the bathtub rough-in, I am not sure how you get the 4x12 cut-out for the p-trap area...are you supposed to use a wood form or just cap off the pipe under the tub area and then come back after you have poured the slab and break out that area?
Any info would be appreciated.
1) For the toilet rough-in, am I supposed to use some sort of collar or tape around the stub where the concrete will touch the pipe to keep the pipe free I guess?
2) For the bathtub rough-in, I am not sure how you get the 4x12 cut-out for the p-trap area...are you supposed to use a wood form or just cap off the pipe under the tub area and then come back after you have poured the slab and break out that area?
Any info would be appreciated.