I would like to finish a roughed-in Basement Bath.
The original plumber told me he would have put a drain for the tub, but could not remember which side.
I cut exploration holes where the dap-out would be and have dug down about 10", but cannot find a drain pipe.
What do I do next ?
A few details:
* House was built in 2004.
* 3" waste pipe goes down 19", from floor to bend, in direction of arrow.
* 2" lav pipe goes down 8" from floor to bend, in direction of arrow. (This pipe extends up to roof as 1.5" vent.)
* Left wall is back of house. Right side is toward street.
* Distance from left dap-out to 3" waste is 2 feet.
The original plumber told me he would have put a drain for the tub, but could not remember which side.
I cut exploration holes where the dap-out would be and have dug down about 10", but cannot find a drain pipe.
What do I do next ?
A few details:
* House was built in 2004.
* 3" waste pipe goes down 19", from floor to bend, in direction of arrow.
* 2" lav pipe goes down 8" from floor to bend, in direction of arrow. (This pipe extends up to roof as 1.5" vent.)
* Left wall is back of house. Right side is toward street.
* Distance from left dap-out to 3" waste is 2 feet.