pjsammy
New Member
- Messages
- 22
- Reaction score
- 0
- Points
- 0
Hi all,
The frost free sillcock (B&K Quartermaster) in the back of our house is not working. When I turn it on, there's no water. I've tried to mess with it a little (started another thread on the subject w/o any replies), so I'm going to just replace the whole darn thing and see what happens.
Question: Based on the attached pictures, the sillcock appears to be threaded to the supply pipe. So I should just be able to unscrew it and screw a new one on, right? I don't need to cut the old one off or solder the new one on?
Just want to double check.
Thanks!!!
note: we moved to this home in Dec 08, so I have no idea what, if anything, was done to winterize the faucet or if it was even working before.
The frost free sillcock (B&K Quartermaster) in the back of our house is not working. When I turn it on, there's no water. I've tried to mess with it a little (started another thread on the subject w/o any replies), so I'm going to just replace the whole darn thing and see what happens.
Question: Based on the attached pictures, the sillcock appears to be threaded to the supply pipe. So I should just be able to unscrew it and screw a new one on, right? I don't need to cut the old one off or solder the new one on?
Just want to double check.
Thanks!!!
note: we moved to this home in Dec 08, so I have no idea what, if anything, was done to winterize the faucet or if it was even working before.