Interlodge
New Member
- Messages
- 28
- Reaction score
- 0
- Points
- 0
I just installed a vessel sink. With that, I now have a significant space in the vanity cabinet below, that I would like to both use efficiently and have look a little cleaner, if possible. From what I have gathered It seems easy to and acceptable to add an extension to the drain tailpiece before the trap. While this works, it's certainly not ideal as it is obtrusively situated in the cabinet. It would be ideal if I could raise the trap up to the drain tailpiece so it would be behind a short drawer and then use some els and a vertical section after the trap to reach the wall inlet, but I realize (I think!) that this would create an s trap. Does anyone have any proper ideas on how to accomplish, like ls or 45 before the trap or something to at least move it to the back of the cabinet so it's not so prominent. Thanks, total drop from bottol the fixture (vessel)to the wall inlet is now 13 inches