tl2tl
New Member
- Messages
- 30
- Reaction score
- 0
- Points
- 0
I will be installing 2 gas heaters side by side, one supplying the lower level and the other the upper.
Either one or both will require a 4" vent pipe.
The 4" vent pipe from the furthest tank will be just about 4 feet long to the chimney.
I was thinking of venting the other tank (which will have a 3" or 4" vent pipe, depending on the tank I get) to the 4" vent of the first tank. It will be an almost a straight up connection 7" to 9" long from the draft hood into the that 4" vent.
Is it ok to do this? And are there any ready-made 4" T's that I can use for this?
Thanks
Either one or both will require a 4" vent pipe.
The 4" vent pipe from the furthest tank will be just about 4 feet long to the chimney.
I was thinking of venting the other tank (which will have a 3" or 4" vent pipe, depending on the tank I get) to the 4" vent of the first tank. It will be an almost a straight up connection 7" to 9" long from the draft hood into the that 4" vent.
Is it ok to do this? And are there any ready-made 4" T's that I can use for this?
Thanks