cowdog
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
Hello,
I wanted a utility sink in my garage, so I decided to undertake the project this weekend. The easiest spot to put the sink is on the wall that has the washer/dryer on the other side. I acutally went ahead and setup all the plumbing and realized that the drain is way too high to put a standard 14" deep utility tub now. The drain I plumbed is about 28" off the garage floor. I'm not sure how I can lower the drain. If you look at the two pictures you can see what I did and the original. Ideally i'd like to put the drain as low as I can which would pretty much be right on top of the foundation.
Thanks!
I wanted a utility sink in my garage, so I decided to undertake the project this weekend. The easiest spot to put the sink is on the wall that has the washer/dryer on the other side. I acutally went ahead and setup all the plumbing and realized that the drain is way too high to put a standard 14" deep utility tub now. The drain I plumbed is about 28" off the garage floor. I'm not sure how I can lower the drain. If you look at the two pictures you can see what I did and the original. Ideally i'd like to put the drain as low as I can which would pretty much be right on top of the foundation.
Thanks!