Steveg91
New Member
- Messages
- 30
- Reaction score
- 0
- Points
- 0
Hey Folks, I'm going to install a Water Pessure Regulator. A local hardware store has a WATTS N55B-M1 for $45, is this a good quality product? Who makes good ones?/what do I look for???
The instructions on the Watts say to install a Backflow Preventer before the Regulator, is this important/ a waste/ trouble/ ???? if I do, what are the requirements? certain distance between the two? certain distance between Preventer and Meter??? anything I'm not asking???
What about an expansion tank or a pressure relief valve?( Watts 530C ) will i need one of these?/ which one??..........
Thanks again,
Steve
The instructions on the Watts say to install a Backflow Preventer before the Regulator, is this important/ a waste/ trouble/ ???? if I do, what are the requirements? certain distance between the two? certain distance between Preventer and Meter??? anything I'm not asking???
What about an expansion tank or a pressure relief valve?( Watts 530C ) will i need one of these?/ which one??..........
Thanks again,
Steve
Last edited: