i'm my own troublemaker
New Member
hello again
excellent forum - thanks again for the help provided.
basement floor drains is today's question. while the floor is ripped up as i finish the interior waterproofing w/Platon & weeping tile, i need to remove an old unvented floor drain, but was planning to use the connection to the main waste line in that spot to connect a pair of new vented floor drains. new floor drains would be 3", with traps and primers. one is in a storage area, and one is at the furnace/HW heater for the condensate line to drain into. run from drains to connection at the waste line is a total of 11 ft. (8ft + 3ft). I was thinking to add this vent line due to the length of the run to the connection.
comments please on the sketch i have attached would be greatly appreciated.
excellent forum - thanks again for the help provided.
basement floor drains is today's question. while the floor is ripped up as i finish the interior waterproofing w/Platon & weeping tile, i need to remove an old unvented floor drain, but was planning to use the connection to the main waste line in that spot to connect a pair of new vented floor drains. new floor drains would be 3", with traps and primers. one is in a storage area, and one is at the furnace/HW heater for the condensate line to drain into. run from drains to connection at the waste line is a total of 11 ft. (8ft + 3ft). I was thinking to add this vent line due to the length of the run to the connection.
comments please on the sketch i have attached would be greatly appreciated.