coyote556
New Member
- Messages
- 9
- Reaction score
- 0
- Points
- 1
Can anyone offer any advise on this. I screwed up and tiled this floor right up to the 3"abs opening in a concrete floor. I bought an inside closet flange for 3" abs, however the problem is the flange has a small shelf on the bottom of it, which makes it sit up too hight off the floor for the toilet to go flush. I was wondering if I could just attach a closet ring to the floor with Tapcons, to hold the toilet bolts in place, and use a wax ring with a horn? As you can see from the pictures, the top edge of the 3" abs is only 3/8" below the level surface of the tile. I appreciate any help and advice. Thanks
Attachments
Last edited: