Howard6131
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
I installed two new vanities and sinks during a remodel. The drains are run through seperate traps and seperate drains in the same drain run. The vent pipe runs parallel above the drain run. The vanity and sink heights are different, 30 and 36 inches. The lower sink drains well, but the taller sink drains much slower, bubbles form in the sink strainer and appear to block the flow. If I run my fingers across the strainer it runs faster, when I stop, the flow slows. Any ideas? Vent problem?