K2
Member
Hey everyone, hopefully an easy question, I'm installing the drain for the clawfoot tub, and it didn't come with any instructions. I understand everything except for the following (please see picture):
1) part #18 screws into the drain from inside the tub, do i need any putty, or silicone underneath?
2) part #17 - does that washer go on the inside of the tub or underneath?
3) part #3 there are 2 overflow washers (#3, #2) one is angled (2), the other flat. Is this just for different tubs, or am I missing something (i.e. should I be using the #3 somewhere??)
4) I'm assuming part #2 goes on the outside of the tub...
Thats it! Thanks for your help,
1) part #18 screws into the drain from inside the tub, do i need any putty, or silicone underneath?
2) part #17 - does that washer go on the inside of the tub or underneath?
3) part #3 there are 2 overflow washers (#3, #2) one is angled (2), the other flat. Is this just for different tubs, or am I missing something (i.e. should I be using the #3 somewhere??)
4) I'm assuming part #2 goes on the outside of the tub...
Thats it! Thanks for your help,