silva80229
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I'm tiling my floor in the basement bathroom. When I removed the toilet, I noticed that the flange is offset from the sewer drain. Only about half of the sewer drain is visible (which probably explains why the old toilet never flushed very well). It appears as though somebody put an angled piece of rubber or something to direct the water that isn't over the drain, into the drain (I hope that makes sense). It's also evident that some of the concrete around the drain has been removed and patched back. My question is, would this be a relatively easy fix? Chipping and replacing the concrete is not a problem. My concern is the fact there is a patch there already and maybe there is a problem that won't allow the flange to line up with the drain. I also bought a new toilet and don't want the problem of it not flushing properly. Any feedback would be greatly appreciated!
I photo is attached.
I photo is attached.