What is the effect if my incoming valve is on but my outgoing valve is off on a water softener? I just learned it had been like that for 10 months and the person who installed it claims that I was getting half softened water like that.
One valve open
- Thread starter Bnagatani
- Start date
Users who are viewing this thread
I would expect that the gallons count number was not counting down
I am not sure, but I think you were getting not-softened water.
I expect the resin regenerated at a time determined by the DO setting.
If you get a Hach 5-B, you could measure softness.
I am not sure, but I think you were getting not-softened water.
I expect the resin regenerated at a time determined by the DO setting.
If you get a Hach 5-B, you could measure softness.
Sponsor
Paid Advertisement
Jeff H Young
In the Trades
the bypass must be open and your getting all hard water
Similar threads
