Eltorro
New Member
- Messages
- 21
- Reaction score
- 0
- Points
- 0
Does anyone have information
on a McDonald pump installed about 1972..the model number on the pump
itself is 4651..the motor is 1/2 hp..It would be great if I could find
out to what depth this model was capable of
pumping. It seems that this unit was part of the 4600 series .
It isn't practical to uncover the well at this time and I'm trying to determine
what it should be replaced with. Well is 175 feet deep but I have no idea how far down the jet/foot valve goes..could be just 50 feet.who knows?
on a McDonald pump installed about 1972..the model number on the pump
itself is 4651..the motor is 1/2 hp..It would be great if I could find
out to what depth this model was capable of
pumping. It seems that this unit was part of the 4600 series .
It isn't practical to uncover the well at this time and I'm trying to determine
what it should be replaced with. Well is 175 feet deep but I have no idea how far down the jet/foot valve goes..could be just 50 feet.who knows?