Low gpm well / pressure switch

[pbr3232]

I have a well that produces 2 gpm. Any ideas about tank size and pressure switch settings. Should the pressure switch be at a low cut in/ cut out setting.

Thanks

 

[NHmaster]

How deep is the well
How big is the caseing
What is the static level of the well

 

[Sponsor]

 

[pbr3232]

I will have to find out that information.

Thanks

 

[Gary Slusser]

You also need to know what hp and gpm the pump is. Normal pressure switch settings are 30/50 or 40/60. You may or may not need a low pressure safety switch or some other way of shutting off the pump if the well goes "dry".