Captainron
New Member
I have just put a sand point in and bought a new jet pump. After hooking up and pulling water at about 6 gal per min, and when i stop using water, my pump doesn't shut off. It gets to about 30 to 35 psi but not any higher. When i unplug the pump, the pressure drops to 12psi and holds at that. I have not made any adjustments yet to the high pressure switch yet but i'm wondering why my pump would drop to 12psi and hold when i unplug my pump? Do you think it could be a leak further down the pipe? Anyone have any ideas?